Description Of Controls; Display; Keypad; Button Description During Normal Operation - Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance

6

DESCRIPTION OF CONTROLS

6.1

Display

The display shows the messages during normal operation
and during the programming and maintenance phase.
6.2

Keypad

Each key function changes
according to the vending
machine mode (ordinary
dispensing or programming
mode).
Each key has a double
function
according to the vending
machine status (standard
operation or programming).
that varies
6.3 Button Description during
Normal Operation
6.3.1 Set 1 Pre-selection button
The function connected to the button may be chosen from
the following options:
A. Beverage 5
B. Pre-selection of beverages 9-16
C. Disabled
6.3.2 Set 2 Pre-selection button
The function connected to the button may be chosen from
the following options:
A. Beverage 6
B. Pre-selection of beverages 17-24
C. Disabled
6.3.3 Keys (1 to 8)
By pressing these keys, the programmed beverages are
dispensed.
6.4

CPU card keys

The CPU electronic board is equipped with 3 buttons
which allow the Maintenance Technician to carry out the
programming and maintenance operations.
P1 Programming menu key
P2 Maintenance menu key
P3 Machine Ready / Free Button
English
35