English
A
Marks
Use the coffee grounds
conveyor C (optional) as
shown in the figure.
In case of placing the appliance on the top of a working
surface, in order to discharge the coffee grounds into a
container placed below , make a 75 mm Ø hole (minimum)
on the surface as shown in the figure. Install the machine in
its final position on the supporting surface (the rings P
indicate the ideal position of the adjustable feet).
34
FR
Machine front side
F
Hole to be made
P
Ideal position of the adjustable feet
5.8
Liquid Drain Setting
The appliance is setup for direct drainage of the drip tray
into container in the dedicated cabinet or into another
container located below the appliance. To use this setting,
cut (or drill a hole in) the panel in the indicated area.
A
diaphragm