Cappuccino With Cold Milk Function - Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance

English
To avoid scalding, wait for
the end of brewing signal
(the message "REMOVE
CUP" will appear on the
display) before placing your
hand in the dispensing
outlet.
In case of failures or
product missing during the
brewing phase, a message
indicating the cause of this
stop will appear on the
display.
Special messages
signals are indicated in
chapter "Troubleshooting".
70
9.2 Cappuccino with cold milk
function
(Only for Cappuccino version)
This model is equipped with a special frothing system,
which automatically draws milk from an external container
(not supplied), like: bottle or Tetra Pak.
To ensure correct operation, make sure that:
• The Cappuccinatore is fully inserted on its support
• The Cappuccinatore is clean, correctly closed, and fully
inserted in its seat.
• The suction hose has no constrictions or bends that might
hinder correct milk suction and flow.
The machine has been tested for correct operation with
milk temperatures between 4 °C and 15 °C.
It is recommended to
always use cold milk and to
comply with the health and
fresh
regulations in force in the
country of use of the
machine.
and
food storage