Management Of Default Values - Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance

• press and hold the P1 button on the CPU;
• Switch on the vending machine;
• after the CPU beep, release the P1 button;
• The CPU recognises the USB key and searches for the file with
the software to be loaded (green and red lights on the CPU flash
alternatively);
• In case of errors, a long beep is emitted and the red light stays
on.
• 3 close beeps and the restart of the vending machine confirm
that the software has been updated.
• switch off the vending machine;
• remove the USB key.
*All common USB keys used on PCs are suitable. Some
restrictions are:
• the device has to be FAT12, FAT16 or FAT32 formatted
• The sector size has to be of 512 Bytes
10.5 Management of default
values
The vending machine software allows you to create and
recall the set of the default values.
To recall the factory preset values, the function to be used
is "Factory default".
If you wish to create a set of default values you can recall
later, the function to be used is "Custom default".
The "Custom default" function allows you to create and
recall later your own set of default values.
To create the set of values, use the "Write custom"
subfunction.
To recall your saved set of values, use the "Read custom"
subfunction.
The parameters which are
affected by the Factory/Custom
default functions are all those
contained within
Programming Menu.
English
the
85