Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance page 55

DISPLAY
1.31.
VM Model
1.32.
Language
1.33.
System Info
2.
PAYMENT SYSTEMS
...
2.1.
Protocol
2.2.
Coin validator
...
2.2.1.
Enable
no
2.2.2.-9
Coin Values
0.00
2.3.
Banknote validator
...
2.3.1.
Enable
no
2.3.2.
INHIBITION LEVEL
255
2.3.3.-6
Banknote Value
...
2.3.3.4.
Banknote
2.4.
MDB settings
...
2.4.1.
Recharge enabled
no
It allows selecting the current model of the vending machine.
The vending machine model is specified on the label located inside the right side panel.
It allows to select the language to be used by the machine.
The available languages are:
Italian, English, French, German, Spanish, Portuguese, Dutch, Turkish, Russian, Polish,
Norwegian, Swedish, Finnish and Danish.
The machine texts can be modified according to the user's needs to add new languages not
included in the default list.
(Contact the Customer Service for any information).
"This option allows you to access a page showing the overall machine configuration.
The display shows the following information:
First line: sw version (""x.yy.zz"" format) / program CRC (""abcd"" format)
Example: ""'SW v1.02.12/087c""
Second line: Boot loader version (""xx"" format) and name of the file searched for by the
boot loader on the USB key ("".s19"" extension not displayed)
Example: ""Boot 08SAE_DA5P""
Third line: memory version (""xxx.yyy."" format) and content CRC (""zzz"" format)
Example: ""Mem 123.456.789"""
The entries of the PAYMENT SYSTEMS are:
Allows enabling of the parameters of the parallel coiner, the mechanical coiner, the
cancelling machine and the choice of values to be assigned to the single money channels.
By setting "Y", the parallel coiner, the mechanical coiner and the cancelling machine control
are enabled.
If set on "N", the parallel coiner (if any) connected to the vending machine will be excluded.
It allows you to set the value of the coins forwarded to the vending machine by the parallel
coiner, the mechanical coiner and the punching machine.
The following "PAIRING TABLE" indicates how channels and related payment systems are
connected to each other.
It enables the parameters of the parallel banknote validator and the choice of values to be
assigned to single banknote channels.
By setting "Y", the management of the parallel reader is enabled.
By setting "N", a parallel reader which may be connected to the vending machine is always
disabled.
Enables setting of the active level of the banknote reader inhibition signal.
Enables setting of the value of banknotes transferred to the vending machine from the
parallel reader.
Enables access to particular functions of the MDB protocol.
It allows disabling or enabling the possibility of performing any Saeco Card recharge operation
By setting RECHARGE = NO the vending machine will only deduct the cost from MDB cards.
Description
English
55