Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance page 47

8.2.3 Description of Messages in the Programming Menu
DISPLAY
1.
SYSTEM MANAGEMENT
...
1.1.
VM Code
531000
1.2.
Stops
...
1.2.1.
Stop coffee C
1.2.2.
Stop Pre-ground
1.2.3.
Stop beverages
1.2.4.
CofGrounds contr.
1.2.5.
Stop CofGrounds
1.2.6.
Reset
1.3.
Water Filter
...
1.3.1.
Last filter change
31.01.2008
1.3.2.
Remaining qty
95
1.3.3.
Filter limit
100
The SYSTEM MANAGEMENT items are:
Enables an identification code to be assigned to the vending machine.
Enables setting of the maximum amount of beverage or coffee.
Once the maximum amount is reached, the vending machine stops dispensing the relevant beverages.
The first digit on the left ("00000") refers to the quantity of product dispensed since the last "RESET" (partial
counters).
The right hand digit, preceded by "LIM", shows the maximum dispensable quantity (value may be modified).
Enables setting of the maximum number of coffee cups to be dispensed before the stop.
It allows setting the maximum number of pre-ground product servings to be brewed before
stopping the pre-grinding.
Enables setting of the maximum number of beverages to be dispensed before the stop.
Enables or disables control of the number of grounds discharged into the coffee grounds drawer.
When set to "YES" the machine will allow a certain number of cups of coffee to be brewed before
requiring the drawer to be emptied (see "STOP COFGROUNDS").
When set to "NO" the machine will not control the number of grounds discharged into the drawer.
It allows you to set the maximum number of coffee cups to be brewed, corresponding to
maximum dump box capacity.
Once reached the set quantity, coffee-based beverages dispensing is stopped.
Five cups of coffee before the lock is engaged, a blinking message appears on the display,
"EMPTY COFGROUNDS".
Important
This lock can be reset by removing the coffee grounds drawer for at least 10 seconds.
Suggested solutions
It is advisable to set a max. of 30 coffees when using the dump box supplied with the
machine.
Important
Do not set any stop value if you are using the machine together with the supporting cabinet,
which is equipped with its own dump box which is not controlled electronically.
Enables resetting of all partial counters relative to product quantity stop functions.
Allows the use of the water filter to be checked.
Date of the last filter reset.
Number of litres of water that can still be dispensed before the filter needs to be
regenerated.
When this value is less than 1, a Warning (W83) is recorded in the Error LOG.
Number of litres of water that can still be dispensed from the filter.
Description
English
47