Table of Contents
Advertisement
English
6
DESCRIPTION OF CONTROLS
6.1
Power button
It is located in the lower left part in the rear of the
machine.
If set to the "I" position the machine turns on
(electrical functions enabled).
If set to the "O" position the machine turns off
(electrical functions disabled).
6.2
Display
The display shows the messages during normal
operation
and
during
maintenance phase.
6.3
Keypad
Each key function changes
according to the vending
machine mode (ordinary
dispensing
programming mode).
Each key has a double
function
according to the vending
machine status (standard
operation or programming).
20
the
programming
and
or
that
varies
6.4
Button Description during
Normal Operation
6.4.1
Set 1 Pre-selection button
The function connected to the button may be chosen
from the following options:
A. Beverage 5
B. Pre-selection of beverages 9-16
C. Disabled
6.4.2
Keys (1 to 8)
By pressing these keys, the programmed beverages are
dispensed.
6.5
CPU card keys
The CPU electronic board has 3 buttons to allow the
Maintenance Technician to carry out programming and
maintenance operations.
P1
Programming menu key
P2
Maintenance menu key
P3
Machine Ready / Free Button
Advertisement
Table of Contents
