Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance page 58

English
DISPLAY
3.3.
Sequence
0C00
3.3.
H2O / Coffee
38
3.3.
Steam Duration
3.3.
Freshbrew Water
3.3.
Pre-ground Water
3.3.
Fresh inst. time
3.3.
Pre-gr.inst.time
3.3.
Just water
101
3.3.
% instant product #:
3:50
3.3.
% pump #:
3:50
3.3.
Instant prod. dose #:
3:005
58
This is the order in which the products making up the beverage are brewed.
The possible choices are:
0 =does not dispense any product
1 = dispenses product 1
2 = dispenses product 2
3 = dispenses product 3
4 = dispenses product 4
5 = dispenses product 5
C = brews coffee using instantly ground coffee
F = brews "fresh brew" coffee using pre-ground coffee
P = brews espresso coffee using pre-ground coffee
B = brews "fresh brew" coffee using instantly ground coffee
W = dispenses hot water
S = dispenses steam in the Cappuccinatore
Consequently, the combination of "3C00" or "30C0" or "03C0" will always dispense product 3 and
coffee beans.
The settings of products making up the beverage will be requested according to the sequence.
Sets the quantity of water to be dispensed for the programmed coffee type (C or B). The
quantity can be set from 1 to 999.
It determines the activation time (in tenths of seconds) for dispensing steam through the
Cappuccinatore.
Sets the quantity of water to be dispensed for the programmed coffee type (P).
The quantity can be set from 1 to 999.
Sets the quantity of water to be dispensed for the programmed coffee type (F).
The quantity can be set from 1 to 999.
Instant FreshBrew dose (F)
Instant pre-ground dose (P)
Defines the amount of hot water to be dispensed.
It determines the instant powder delivery rate.
The value can be set between 10 and 100.
The lower the value the smaller the powder delivery rate.
It determines the water delivery rate.
The value can be set between 20 and 100.
The lower the value the smaller the water delivery rate.
This defines the quantity of instant product to be brewed.
Example: The "005" quantity indicates that the motor of instant product 3 will be operated for 5 hundredths of a
second.
The amount of instant product can be adjusted from "1" to "5000" in steps of 1.
Brewing of the instant product does not occur when the parameter is set at "0000" (in this case water is brewed).
Description