Connection To Water Mains - Saeco Phedra Evo D.A. 5P2015 Operation And Maintenance

English
5.5

Connection to water mains

The pressure reducer is
calibrated during assembly.
Should problems
with the calibration of the
pressure
outlet pressure value must
absolutely be reset to 0.8 –
1 bar max. Different or
approximate
may cause product quality
and quantity
when brewed.
It is recommended to use
a descaling device for the
water network supplying
the vending
especially for water with a
high calcium
magnesium content (hard
water).
32
occur
reducer, the
calibration
variations
machine,
and
Connect
machine to drinking water
mains with
between 0.15 MPA and
0.8 MPA (1.5 and 8 bar),
see data on the label.
Before connecting
appliance
network, please read and
follow the
regulations in force in your
country.
Connect the water network hose (supplied with the
appliance) to the vending machine 3/4" Gas coupling.
The water mains pipe
should
according to the standard
IEC 61770.
the vending
pressure
the
to water
applicable
be certified