Overview Of Important Parameters - Siemens SINAMICS S120 Series Function Manual

Communication via PROFINET IO
5.7 PROFINET with 2 controllers
9. In HW Config, click "Station\Save and compile".
10.Click "Open object with STARTER" again
After completing the last save operation, you will see in the STARTER window that the
PROFIsafe telegrams have been assigned to PN-IO-1 and the drive telegrams to PN-IO.
Figure 5-17
If there is a checkmark after each telegram type in STARTER, then the Shared Device
has been successfully configured.
5.7.3

Overview of important parameters

Overview of important parameters (see SINAMICS S120/S150 List Manual)
• p9601
• p9801
150
New project completed in STARTER
SI enable functions integrated in the drive (Control Unit)
SI enable functions integrated in the drive (Motor Module)
Function Manual, 12/2018, 6SL3097-5BD00-0BP0
Communication