Using The Ten-Key Input Function - Sony RM-280 Operation Manual

Using the Ten-Key
Input Function
You can enable the ten-key input function in editor mode
or remote control mode (basic VTR function mode,
XDCAM mode), and use it to cue up to your desired
positions.
Enabling the ten-key input function
When you enable the ten-key input function, the REVIEW
and PF1 to PF9 (0 to 9) buttons light.
The method of enabling the function differs depending on
the mode.
In editor mode: Press an edit button (IN or OUT) while
pressing the RECORDER (DEVICE 1) or PLAYER
(DEVICE 2) button.
In remote control mode (basic VTR function mode):
Press the PF9 button.
In remote control mode (XDCAM mode): Press the
PREVIEW button while pressing the RECORDER
(DEVICE 1) or PLAYER (DEVICE 2) button.
To disable the ten-key input function
Press the PF15 button.
Operations while ten-key input function is
enabled
Key Template
notation
REVIEW 0
PF1 1
PF2 2
PF3 3
PF4 4
PF5 5
PF6 6
PF7 7
PF8 8
PF9 9
PF10 SET
PF11 CUE UP
70

Using the Ten-Key Input Function

Function
0 (numeric) button
1 (numeric) button
2 (numeric) button
3 (numeric) button
4 (numeric) button
5 (numeric) button
6 (numeric) button
7 (numeric) button
8 (numeric) button
9 (numeric) button
In editor mode: Confirm the
input to the edit point. (After
confirmation, this disables the
ten-key input function.)
XDCAM mode: No function.In
remote control mode: Perform
registration.
Cue up to the entered timecode.
(If entry is still in progress,
confirm to cue up.)
Key Template Function
notation
PF12 CLEAR Clear a timecode that is being
entered.
PF13 +/±/–/CLIP/ Invert the sign for timecodes in
EDL the ±12H display format.
In XDCAM mode, toggle
between timecode signs, clip
number entry, and EDL number
entry selection.When clip or
EDL number entry is selected,
cue up using that number.
PF14 BACK Clear the number that was last
SPACE entered.
PF15 EXIT Disable the ten-key input
function.