Selecting The Screen Display Mode And Input Signal - Sony JunboTron JME-SA200 Operating Instructions Manual

Selecting the Screen Display Mode and Input
Signal
28
Adjustment Before Adjustment
Like the JTC-C200 ICU controller, you can select the screen display mode
for the images to be displayed on the screen and the type of the video input
signal with this unit.
As the GEOMETRY CONTROL data and the SIGNAL CONTROL data
are stored in the memory for each input signal type, select the input signal
correctly before adjustment.
1
Establish communication with the ICU controller (page 21) and
display the MAIN MENU.
2
Press the v or V button to select SWITCHER CONTROL and press the
ENTER button.
The SWITCHER CONTROL menu appears.
* * * * * * M A I N M E N U * * * * * *
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
3
Select the screen display mode.
Press the v or V button to select MASTER and press the B or b button
to select the display mode.
* * S W I T C H E R C O N T R O L * *
M A S T E R : I N P U T - 1
I N P U T - 1 : C O M P O S I T E
4
When INPUT-1 is selected for MASTER, select the type of the input
signal.
Press the v or V button to select INPUT-1 and press the B or b button
to select the type of the input signal. The selected signal is displayed
on the screen.
* * S W I T C H E R C O N T R O L * *
M A S T E R : I N P U T - 1
I N P U T - 1 : C O M P O S I T E
To return to the MAIN MENU
Press the MENU button.
* * S W I T C H E R C O N T R O L * *
M A S T E R : I N P U T - 1
I N P U T - 1 : C O M P O S I T E
INPUT-1: Video images from VCR, video
camera, etc.
INPUT-2: Computer graphics from the
computer
INPUT-1&2: Computer graphics with
superimposed video image
Type of the input signal
COMPOSITE: Composite video signal
COMPONENT: Component signal
RGB: RGB signal