Sony RM-280 Operation Manual page 77

Item Item name
number
21 MONI SEL
(RECORDER MONITOR OUT SELECT)
22 AUD PRST
(AUDIO PRESET MODE)
23 RPLY SPD
(REPLAY SPEED)
24 LCL DIS
(LOCAL DISABLE)
25 SPLIT ED
(SPLIT EDIT)
Settings
In editor mode, when editing with two VTRs but with a monitor
connected to only the recorder, pressing the PLAY button of the
recorder determines whether the recorder is forced into E-E mode
to view the player's playback signals on the monitor.
[MANUAL]: Doesn't force the recorder into E-E mode.
AUTO: Forces the recorder into E-E mode. The player's playback
signal is output to the monitor.
AUTO&CHR: Forces the recorder into E-E mode. The player's
playback signal is output to the monitor. When the PLAYER or
RECORDER button is pressed, the text information to be
superimposed can be changed.
When the PLAYER button is pressed
The text information of the player is superimposed on the E-E
picture. In editing or previewing, the text information of the
recorder is superimposed.
When the RECORDER button is pressed
The text information of the recorder is superimposed on the E-E
picture.
Note
When the recorder is in rec-inhibit mode, the E-E picture is not
output.
Sets the audio of the EDIT PRESET keys in editor mode.
[DA 1-4CH]: Regards the EDIT PRESET keys (A1, A2, A3, and A4)
as the preset of the digital audio 1 to 4.
DA 1-8CH: Regards the EDIT PRESET keys (A1, A2, A3, and A4)
as the preset of digital audio 1 to 8.
To configure or release presets for 5 to 8, press A1 to A4 while
pressing the ASM key. To configure ASM, press the VIDEO key
while pressing the ASM key.
ANA 1/2CH: Regards the EDIT PRESET keys (A1 and A2) as the
preset of the ANALOG AUDIO A1 (CUE) /A2 (CUE).
Notes
• When this item is set to ANA 1/2CH, the audio signal can't be
assigned to the A3 and A4 keys.
• When set to DA 1-8CH, be aware that some setting operations
may differ from previous operations. The audio preset status can
be displayed in the timecode display area by changing the AUDIO
PRESET setting or by pressing the ASM key.
Sets the variable playback speed assigned to the PF13, PF14, and
PF15 keys when the setup menu item 19 FNC MODE is set to
REPLAY.
[02-05-08]: 0.2 times (PF13 key), 0.5 times (PF14 key), 0.8 times
(PF15 key)
02-05-10: 0.2 times (PF13 key), 0.5 times (PF14 key), 1 times
(PF15 key)
02-05-20: 0.2 times (PF13 key), 0.5 times (PF14 key), 2 times
(PF15 key)
Sets whether to enable operation from the front panel of the
connected device during automatic editing, preview, or review.
[DIS]: All the button operations are disabled.
ENA: The button operations depend on the settings of the
connected device.
(Example : When you connect the HDW-S280 to this unit, the
button operations depend on the setting of setup menu item
006.)
Sets whether to enable audio-split editing.
[DIS]: Audio-split editing is disabled. The GO TO/SPLIT IN button
works only as the GO TO button.
AUDIO IN: Audio-split editing is enabled. The GO TO/SPLIT IN
button works as both the GO TO button and the SPLIT IN
button.
77
Setup Menu