Items In The Setup Menu - Sony RM-280 Operation Manual

Items in the Setup Menu

In the "Settings" column of the table, the factory setting is indicated by enclosing parenthesis.
Item Item name
number
01 PREROLL
(PREROLL TIME)
02 CNT RST
(COUNTER AUTO RESET)
03 AUTO ENT
(AUTOMATIC IN ENTRY AFTER AUTO
EDIT)
04 CTL RNGE
(CTL/RTC RANGE)
05 SYNC SEL
(SYNCHRO SELECT)
06 SYNC VTR
(SYNCHRO VTR)
07 SYNC ERR
(SYNCHRO ERROR)
08 SVLCK ER
(SERVO LOCK ERROR)
09 EDIT DLY
(EDIT DELAY)
10 R ST DLY
(RECORDER START DELAY)
11 P ST DLY
(PLAYER START DELAY)
Settings
Sets the preroll time.
3s, [5s], 7s, 10s, 15s, 30s
Sets whether to reset the time counter when the first edit point is
entered, when the time data in the display window is set to RTC or
CTL.
[OFF]: Doesn't reset automatically.
AUTO RST: Resets automatically.
Sets whether to automatically enter the OUT point being edited as
the IN point of the next edit after the automatic editing.
[OFF]: Doesn't enter the IN point automatically.
REC ENT: Enters the IN point for the tape of the recorder
automatically.
R/P ENT: Enters the IN point for the tapes of both the recorder and
the player automatically.
Sets the display range of time data when the TC/RTC/CTL switch is
set to RTC or CTL.
[+ –12H]: ± 12-hour clock
24H: 24-hour clock
Sets whether to adjust the tape speed of the player and the recorder
and to synchronize them.
[ON]: Synchronizes.
OFF: Doesn't synchronize.
Sets whether tape speed of the recorder or the player will be
controlled when synchronizing.
[RECORDER], PLAYER
Sets whether to abort the editing if the unit cannot synchronize the
tape speed of the player and the recorder to an accuracy of ± 0
frame, when setup menu item 05 SYNC SEL is set to other than
OFF.
[ABORT]: Aborts the editing.
EDIT: Keeps on the editing.
Note
An editing may be aborted even if this setting is set to EDIT.
Sets whether to abort the editing when the servo-mechanism of the
VTRs doesn't lock.
[ABORT]: Aborts the editing.
EDIT: Keeps on the editing.
Sets by frame the edit delay time (the time from when this unit sends
the recording command until the time the recorder starts recording)
of the recorder.
[AUTO]: Sets to the preset value depending on the VTR.
–1 to –24: Set manually.
Note
When you set the edit delay time manually, perform a trial editing,
and confirm the value to prevent editing errors.
Sets whether to set the start delay time of the recorder to the preset
value or the value learned by the LEARN function.
[AUTO]: Sets to the preset value.
LEARN: Sets to the learned value.
Sets whether to set the start delay time of the player to the preset
value or the value learned by the LEARN function.
[AUTO]: Sets to the preset value.
LEARN: Sets to the learned value.
75
Setup Menu