Snmp-Server Contact - SMC Networks EliteConnect SMC2555W-AG User Manual

Command Line Interface
• ro - Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
• rw - Specifies read/write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Default Setting
• public - Read-only access. Authorized management
stations are only able to retrieve MIB objects.
• private - Read/write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Command Mode
Global Configuration
Command Usage
If you enter a community string without the ro or rw option, the
default is read only.
Example
SMC-AP(config)#snmp-server community alpha rw
SMC-AP(config)#

snmp-server contact

This command sets the system contact string. Use the no form to
remove the system contact information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact.
(Maximum length: 255 characters)
Default Setting
Contact
6-36