daylight savings. To view the current SNTP settings, use the
show sntp command.
SMC-AP(config)#sntp-server ip 10.1.0.19
SMC-AP(config)#sntp-server enable
SMC-AP(config)#sntp-server timezone +8
SMC-AP(config)#sntp-server daylight-saving
Enter Daylight saving from which month<1-12>: 3
and which day<1-31>: 31
Enter Daylight saving end to which month<1-12>: 10
and which day<1-31>: 31
SMC-AP(config)#exit
SMC-AP#show sntp
SNTP Information
=========================================================
Service State
SNTP (server 1) IP
SNTP (server 2) IP
Current Time
Time Zone
Daylight Saving
31th
=========================================================
SMC-AP#
CLI Commands for the System Clock – The following example
shows how to manually set the system time when SNTP server
support is disabled on the access point.
SMC-AP(config)#no sntp-server enable
SMC-AP(config)#sntp-server date-time
Enter Year<1970-2100>: 2004
Enter Month<1-12>: 10
Enter Day<1-31>: 10
Enter Hour<0-23>: 18
Enter Min<0-59>: 35
SMC-AP(config)#
Advanced Configuration
: Enabled
: 137.92.140.80
: 192.43.244.18
: 19 : 35, Jan 10th, 2004
: +8 (TAIPEI, BEIJING)
: Enabled, from Mar, 31th to Oct,
6-28
6-29
6-32
6-31
6-32
6-29
6-30
5-39