Sntp-Server Timezone; Show Sntp - SMC Networks EliteConnect SMC2555W-AG User Manual

Command Line Interface

sntp-server timezone

This command sets the time zone for the access point's internal
clock.
Syntax
sntp-server timezone <hours>
hours - Number of hours before/after UTC.
(Range: -12 to +12 hours)
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets the local time zone relative to the
Coordinated Universal Time (UTC, formerly Greenwich Mean
Time or GMT), based on the earth's prime meridian, zero
degrees longitude. To display a time corresponding to your
local time, you must indicate the number of hours and minutes
your time zone is east (before) or west (after) of UTC.
Example
SMC-AP(config)#sntp-server timezone +8
SMC-AP(config)#

show sntp

This command displays the current time and configuration
settings for the SNTP client.
Command Mode
Exec
6-32