Radio-Mode - SMC Networks EliteConnect SMC2555W-AG User Manual

Default Setting
Ethernet interface
Command Mode
Exec
Example
SMC-AP#show interface ethernet
Ethernet Interface Information
========================================
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Admin status
Operational status
========================================
SMC-AP

radio-mode

This command sets the working mode for the wireless interface.
Syntax
radio-mode <b | g | b+g>
• b - b-only mode: Both 802.11b and 802.11g clients can
communicate with the access point, but 802.11g clients can
only transfer data at 802.11b standard rates (up to
11 Mbps).
• g - g-only mode: Only 802.11g clients can communicate with
the access point.
• b+g - b & g mixed mode: Both 802.11b and 802.11g clients
can communicate with the access point.
Default Setting
b & g mixed mode
: 192.168.1.1
: 255.255.255.0
: 192.168.1.253
: 192.168.1.55
: 10.1.0.55
: Up
: Up
#
Interface Commands
6-73