SMC Networks EliteConnect SMC2555W-AG User Manual page 92

System Configuration
CLI Commands for Downloading Software from a TFTP Server –
Use the copy tftp file command from the Exec mode and then
specify the file type, name, and IP address of the TFTP server.
When the download is complete, the dir command can be used
to check that the new file is present in the access point file
system. To run the new software, use the reset board command
to reboot the access point.
SMC-AP#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>:
TFTP Source file name:smc-img.bin
TFTP Server IP:192.168.1.19
SMC-AP#dir
File Name
--------------------------
dflt-img.bin
smc-img.bin
syscfg
syscfg_bak
262144 byte(s) available
SMC-AP#reset board
Reboot system now? <y/n>: y
5-34
[1]:1
Type File Size
---- -----------
2 1319939
2 1629577
5 17776
5 17776
6-42
6-44
6-14