SMC Networks EliteConnect SMC2555W-AG User Manual page 63

CLI Commands for System Identification – Enter the global
configuration mode, and use the system name command to
specify a new system name. Enter the wireless configuration
mode (either 11a or 11g), and use the ssid command to set the
service set identifier. Then return to the Exec mode, and use the
show system command to display the changes to the system
identification settings.
SMC AP#configure
SMC-AP(config)#system name R&D
SMC-AP(config)#interface wireless a
SMC-AP(if-wireless a)#ssid r&d
SMC-AP(if-wireless a)#end
SMC-AP#show system
System Information
===================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code : US - UNITED STATES
MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Native VLAN ID
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
Slot Status
Software Version
===================================================
SMC-AP#
: A324003220
: 0 days, 0 hours, 32 minutes, 51 seconds
: r&d
:
: Contact
: 00-30-F1-91-91-5B
: 192.168.2.51
: 255.255.255.0
: 192.168.2.250
: DISABLED
: 1
: ENABLED
: ENABLED
: ENABLED
: 80
: Dual band(a/g)
: v3.0.02
Advanced Configuration
6-11
6-20
6-68
6-79
6-12
6-33
5-5