Command Groups - SMC Networks EliteConnect SMC2555W-AG User Manual

Command Line Interface

Command Groups

The system commands can be broken down into the functional
groups shown below.
Command
Group
General
System
Management
SNMP
Flash/File
RADIUS
Authentication Configures IEEE 802.1x port access control and
Filtering
Interface
IAPP
VLANs
The access mode shown in the following tables is indicated by
these abbreviations: Exec (Executive mode), GC (Global
Configuration), and IC (Interface Configuration).
6-10
Description
Basic commands for entering configuration
mode, restarting the system, or quitting the CLI
Controls user name, password, system logs,
browser management options, clock settings,
and a variety of other system information
Configures community access strings and trap
managers
Manages code image or access point
configuration files
Configures the RADIUS client used with 802.1x
authentication
address filtering
Filters communications between wireless clients,
controls access to the management interface
from wireless clients, and filters traffic using
specific Ethernet protocol types
Configures connection parameters for the
Ethernet port and wireless interface
Enables roaming between multi-vendor access
points
Configures VLAN membership
Page
6-11
6-16
6-35
6-40
6-45
6-50
6-60
6-64
6-98
6-99