SMC Networks EliteConnect SMC2555W-AG User Manual page 122

System Configuration
AP System Configuration – The AP System Configuration table
displays the basic system configuration settings:
System Up Time: Length of time the management agent has
•
been up.
MAC Address: The physical layer address for this device.
•
• System Name: Name assigned to this system.
• System Contact: Administrator responsible for the system.
• IP Address: IP address of the management interface for this
device.
IP Default Gateway: IP address of the gateway router between
•
this device and management stations that exist on other
network segments.
HTTP Server: Shows if management access via HTTP is
•
enabled.
• HTTP Server Port: Shows the TCP port used by the HTTP
interface.
• Firmware Version: Shows the version number for the runtime
code.
AP Wireless Configuration – The AP Wireless Configuration table
displays the wireless interface settings listed below. Note that
Radio 1 refers to the 802.11a interface and Radio 2 refers the
802.11b/g interface.
• SSID: The service set identifier for this wireless group.
• 802.1x: Shows if IEEE 802.1x access control for wireless
clients is enabled.
Radio Channel: The radio channel through which the access
•
point communicates with wireless clients.
Radio Encryption: The key size used for data encryption.
•
• Radio Authentication Type: Shows if open system or shared
key authentication is used.
5-64