SMC Networks EliteConnect SMC2555W-AG User Manual page 69

Primary Radius Server Setup – Configure the following settings
to use RADIUS authentication on the access point.
• IP Address: Specifies the IP address of the RADIUS server.
• Port: The UDP port number used by the RADIUS server for
authentication messages. (Range: 1024-65535;
Default: 1812)
• Key: A shared text string used to encrypt messages between
the access point and the RADIUS server. Be sure that the
same text string is specified on the RADIUS server. Do not
use blank spaces in the string. (Maximum length: 255
characters)
• Timeout: Number of seconds the access point waits for a reply
from the RADIUS server before resending a request.
(Range: 1-60 seconds; Default: 5)
• Retransmit attempts: The number of times the access point
tries to resend a request to the RADIUS server before
Advanced Configuration
5-11