Roland VersaUV LEJ-640 F User Manual page 39

REDO ADJ. ?
YES [DONE]
For the individual setting method of this setting item and the description, refer to page 77 "Correcting for
Misalignment in Bidirectional Printing."
3.
Saving the Setting as Preset
PRESET
[SAVE] NEXT
SAVE TO
NAME1
SET NAME
COMPLETED
For the individual setting method of this setting item and the description, refer to page 70 "Fully Utilizing
Preset Function."
This completes the operation of the [MEDIA SETTING] menu.
Press to select [YES].
Press to enable the setting.
The test pattern of bidirectional correction is output again. Go back
to the procedure and set again.
[To go to the next after correction is completed]
Press to select [DONE].
Press to enable the setting.
Press to select [SAVE].
Press to enable the setting.
If you select [NEXT], the performed settings are retained. However,
those settings are not saved as presets.
Use to select the destination to save.
You can select one of NAME1 to 8.
Press to enable the setting.
Use to select characters.
Use to move the next character.
You can enter up to15 characters.
Press to enable the setting.
Setup of Media
2
37