Media Feed Is Not Smooth; Media Wrinkles Or Shrinks - Roland VersaUV LEJ-640 F User Manual

Media Feed is Not Smooth

A variety of problems can occur if the media feed is not smooth. This can cause such problems
as poor printing quality, contact with the media by the print head, misaligned positioning, or
media jams. Take action as follows.

Media Wrinkles or Shrinks

Is the temperature of room too low?
Use this machine in an environment having an ambient temperature of 20 to 32°C (68 to 90°F). If used in the
environment where the temperature is below 20°C, the media may get wrinkled depending its type or width.
If using the de ected media, it cause winkle of the media.
Is the humidity of the room too high?
Use this machine in the environment of 35 to 80 %RH (non condensation).
6
103