Roland VersaUV LEJ-640 F User Manual page 35

32 I
n order to see well where the laser pointer is positioned, push
33
Observe through the front cover where the laser pointer is positioned, if it is in the right
position, go to point 38
34
If it isn't in the right position, always observing the laser light, with the key
manually until you have reached the wanted position
W XXXX mm
.
35
36
37
the actions above described (from point 29 to point 36).
Push the key BASE POINT
(the related control light will switch on) to
memorize the new starting point.
In case you want to memorize the entire
working area as it is set up, push at the
same time the keys HOME and SHIFT, the
red and green leds under the display will
means that the storage of the area was suc-
cessfully completed.
Switch on
it will appear
move
33
2