Roland VersaUV LEJ-640 F User Manual page 34

Switch on
21
Establish which one is the working area that you wish to occupy (i.e. area 3)
22
2
23
24
On the display will appear the screen page
25
Push the key
26
2 7
28
Push the key,
29
30
In order to give the starting point of the printing carriage on the printing unit commands
panel, push the arrow key once.
31
The carriage will start moving, wait until it is positioned at the starting point and on the
display will appear "W1600 mm", it means that the action is completed.
32
With the numeric key (from 2 to 6) enable the areas from
1 to 3 pushing on the related keys, you will notice that the
numbers 1, 2 and 3 will be lighted, the others should
remain disabled (not lighted keys)
to set the thickness (i.e. 1 mm) of the charged medium.
With the numeric keyboard, digit the thickness (in the
example number "1")
, the machine will move at the set height.
To set up the starting point of the printing FORWARD
(that is to move the machine at the right position) you need to push and
keep pushed the arrow key < until the printing unit stops.
It indicates that the vacuum is active.
On the display will appear number "0"