A Message Appears
[CAN'T SETUP]
This is displayed when the print head may have contacted the media and media setup is interrupted. Adjust
the height of the print head and set up the media again.
P. 78 "Adjusting Head Height to Match Media Thickness"
[TIME FOR MAINTENANCE]
The time has come to perform the manual cleaning. After verifying, press
P. 56, "Performing Manual Cleaning"
[TIME FOR WIPER REPLACE]
It is time to replace the wipers. After verifying, press
P. 64, "Replacing the Wiper"
6
108
.
.