Roland VersaUV LEJ-640 F User Manual page 32

Switch on
5
2
6
7
8
9
The machine is ready for use.
10
11
The printing unit will move to the wished position.
12
Take the material to be printed and with a proper tool, measure the thickness (i.e. 1mm)
13
Position the material to be printed in the correct position based on the reference points
on the plane.
14
Push the button
30
Push and keep pushed the arrow key
To position manually the printing unit as much as it is needed to place
the material to be printed on the table.
to select the mode.
On the Display of the Table Commands
Panel, Push the key
On the display will appear this screen page:
push the key to execute the machine
axis reset,
On the display will appear this screen page:
Push the key
of the machine resetting and...
... wait until on the display the following
screen page will appear
>
.