Roland VersaUV LEJ-640 F User Manual page 41

NORMAL CL.
A C
CLEANING...
>>
NORMAL CL.
A C
W XXXmm
SETUP SHEET
ROLL
Perform a printing test again to make sure the dot drop-out has been corrected.
If the problem persists, try performing cleaning a second time. If the printer has been used for a long period,
the problem may persist even after two or three-cycle cleaning. Then try cleaning using a di erent method.
P. 53, "When Normal Cleaning Is Not Effective"
Examine the results from di erent angles in a well-lighted location. Take advantage of re ected light to en-
able visual checking.
Hold down for one second or longer. The normal cleaning for all the print heads starts.
Press .
Normal cleaning starts.
When it nishes, the screen shown in the gure appears again.
Press
original screen.
in this order to go back to the
Outputting
2
39