Application planning
3.2 Use of the ET 200S in a redundant system
3.2
Use of the ET 200S in a redundant system
Properties
The ET 200S is integrated in a redundant DP system as DPV0 or DPV1 slave via the Y
switching.
Requirements
DPV0
•
•
•
Figure 3-1
Procedure
1. Configuration of the redundant DP system (redundant DP master, PROFIBUS DP,
2. Configure the ET 200S with
Reference
For additional information see the documentation for the Y-connection (manual or product
information (http://support.automation.siemens.com/WW/view/en/1142696)).
42
Possible with all interface modules
from STEP 7 V5.3 SP3
GSD file
ET 200S and Y switching
slaves)
DPV1
IM151-1 HIGH FEATURE
•
(from 6ES7151-1BA01-0AB0)
from STEP 7 V5.3 SP3
•
STEP 7
Operating Instructions, 08/2008, A5E00515771-06
ET 200S