Siemens SIMATIC ET 200S Operating Instructions Manual page 72

Installing
4.11 Mounting Color Identification Labels for ET 200S and ET 200S COMPACT
Mounting Color-Coded Labels
1. Press the point of the color-coded label using the screwdriver into the provided opening
2. Hold the color-coded label during the following steps.
3. Bend the star-shaped mount upwards by approx. 30° to 40°.
4. Detach the color-coded label from the mount by moving the mount back and forth
Figure 4-15 Mounting Color-Coded Labels
Removing Color-Coded Labels
Use a screwdriver to lever the color-coded labels from their mounts.
Note
Ensure that the color-coded labels do not fall into the terminal openings. Color-coded labels
can only be removed from terminal openings after the COMPACT module has been
dismantled.
72
of the terminal module.
sideways.
Operating Instructions, 08/2008, A5E00515771-06
ET 200S