Wiring and assembly
5.4 Wiring the ET 200S
4. Strip the insulation from the ground wire (from 6 mm to 25 mm
5. Attach the other end to the ground bus.
Note
To stabilize the shield connection, you must mount and screw in at least one shield
terminal above the shield connection element.
86
ground connection terminal (under the conductor rail). Tighten the ground connection
terminal (2 Nm to 2.5 Nm).
5
4
①
Shield terminal
②
Insulation material removed
③
Cable to the encoder
④
Cable to the ground bus
⑤
Ground connection terminal
Figure 5-7
Connecting cable shields
), and insert it in the
2
1
2
3
Operating Instructions, 08/2008, A5E00515771-06
ET 200S