Moisture And Infiltration; Checking The Consignment - Siemens SIPROCESS GA700 Operating Instructions Manual

Continuous gas analysis

Hide thumbs Also See for SIPROCESS GA700:

Table of Contents

Introduction

1.5

Moisture and infiltration

NOTICE

Damage to the device resulting from moisture and infiltration

Since the original packaging of the device only offers limited protection, moisture and

infiltration could damage the device.

• Use at least the original packaging.

• Additionally protect the device by means of further packaging if appropriate.

• Observe the associated transport, storage and environmental conditions. You can find

1.6

Checking the consignment

1. Check the packaging and the device for visible damage caused by inappropriate handling

during shipping.

2. Report any claims for damages immediately to the shipping company.

3. Retain the damaged parts for clarification.

4. Check the scope of delivery by comparing the shipping documents with your order for

correctness and completeness.

Using a damaged or incomplete device

• Danger of explosion in hazardous areas.

• Do not use damaged or incomplete devices.

further information on this at: → Technical specifications (Page 73).

WARNING

Operating Instructions, 05/2022, A5E35640463-07

Field device

Table of Contents