Connection Details; Analog Audio Connections - Extron electronics IN1804 Series User Manual

Connection Details

Analog Audio Connections

Wire the audio input and output connectors as shown in figure 9. Use the supplied tie wrap
to strap the audio cable to the extended tail of the connector.
Sleeves
Sleeves
Figure 9.
ATTENTION:
NOTES:
Tip
Ring
Tip
Ring
Balanced Audio Output
Tip
Ring
Tip
Ring
Balanced Audio Input
Analog Audio Wiring Configuration
• For unbalanced audio, connect the sleeves to the ground contact. Do not connect
them to negative (–) contacts.
• Pour l'audio asymétrique, connectez les manchons au contact au sol. Ne PAS
connecter les manchons aux contacts négatifs (–).
•
The length of the exposed wires in the stripping process is important. The ideal
length is 3/16 inch (5 mm). If the exposed portion is longer, the wires may touch,
causing a short circuit between them. If the exposed wires are shorter, they can be
easily pulled out, even if tightly fastened by the captive screws.
• Do not tin the wires. Tinned wire does not hold its shape and can become loose
over time.
No Ground Here
Tip
Sleeves
Tip
No Ground Here
Unbalanced Audio Output
Tip
Sleeve
Tip
Sleeve
Unbalanced Audio Input
IN1804 Scaling Presentation Switcher • Installation
Do not tin the wires!
17