Outputs Panel - Extron electronics IN1804 Series User Manual

Editing the date, time, and time zone
1. Click the
box opens.
Figure 51.
2. Set the time, date, and time zone as desired:
Time — In the
•
text fields and enter the time, or click the up and down arrows to display the
desired values.
AM or PM — Click the button (
•
AM
Date — In the
•
the calendar icon (
month only).
Time Zone — In the
•
drop-down menu (
3. When finished entering settings, click
dialog box without implementing the settings.

Outputs Panel

The
Outputs
of the outputs, their signal type, and the HDCP status of all connected outputs.
The following status symbols may be displayed for connected outputs:
Symbol
No Display
link in the lower-left corner of the panel. The
Edit
Edit Device Status Panel
panel (see figure 51,
Time
and .
PM
field ( ), either click in the text field and enter the date, or click
3
Date
) and select the desired date in the pop-up calendar (current
4
Timezone
).
5
panel (see figure 46, , on page 91) displays the resolution and refresh rate
5
Definition
The display is HDCP compliant.
The display is not HDCP compliant, or no signal is being received from
the connected display.
No display is connected.
IN1804 Scaling Presentation Switcher • Internal Web Pages
Edit Device Status
), either click in the hour and minute
1
) at the right of the time fields to toggle between
2
panel, select the desired time zone from the
to confirm them, or
Save
dialog
to close the
Cancel
95