Reference Information; Mounting; Tabletop Mounting; Rack Mounting - Extron electronics IN1804 Series User Manual

Reference
Information
This section provides reference or supplemental information. Topics in this section include:
•
•

Mounting

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

Rack Mounting

Mount the scalers into racks with the pre-installed rack ears (see
mounted devices
rack ears on both side of the device with the screw holes in the rack so they device is level.
Use the provided screws to attach the device to the rack.
Figure 55.
Mounting
Downloading Updated Firmware
on the next page). To install the device, line up the screw holes on the
1U Universal Rack Shelf
Front false
faceplate
uses 2
screws.
Use 2 mounting holes on
opposite corners.
Rack Mounting the IN1804
IN1804 Scaling Presentation Switcher • Reference Information
1/2 Rack Width Front False
Faceplate
(2) 4-40 x 3/16"
Screws
NOTE:
Using screws longer
than 3/16" may damage the
unit and void the warranty.
UL guidelines for rack
98