Output Submenu - Extron electronics IN1804 Series User Manual

Output Submenu

Figure 23.
The
Output
format, and HDCP notification. You can also select a user-loaded logo image to display and
position it on the screen.
NOTE: Figure 23 shows the
and Standard models have
Format
• Output Rate — Select this item to specify the output resolution and refresh rate.
The IN1804 Series scalers have a range of resolutions from which to choose (see the
Output Resolutions and Rates
available rates depend on the selected resolution.
Five custom user-defined output rate slots are also available to be defined via SIS
commands or via the
been captured from a display device or has not been uploaded to the unit, these slots
default to 1080p @ 60 Hz.
When a resolution is applied to a user-defined EDID slot, its name is displayed in the
Output Resolution
be
C1: 1280x780 @ 60 Hz (EXN)
name of the manufacturer of the device).
For a list of all available output resolutions for the IN1804 series, see the
Resolutions
NOTE: The five custom, user-defined output rates default to 1080p @ 60 Hz when
no custom EDID is captured or uploaded.
Output Submenu
submenu enables you to configure the output resolution, refresh rate, HDMI
Output
TP 1A Format
) and as the third option (instead of
TP 1A Mode
table on the next page for the available settings). The
Capture EDID
panel in the format c
(the last three letters in parentheses represent the
table on page 31.
IN1804 Scaling Presentation Switcher • Operation
submenu of the IN1804 DI model. The IN1804 DO
as the second option (instead of
– – – –
item on the menu. If a custom EDID has not
Input
: x @
n nnnn nnnn nn
HDMI 1A
).
( ). An example would
XXX
Input EDID
33