Quick Setup Submenu - Extron electronics IN1804 Series User Manual

Quick Setup Submenu

Figure 18.
The
Quick Setup
provides quick access to frequently-used settings. This submenu contains the following
items, which also appear on other submenus in the system:
INn: Input Type — Displays the format of the selected input (read-only).
•
• INn: EDID — Press the ƒ and „ buttons to select the resolution or the rate list. Press
>
the
from the resolutions list matches the current output resolution. There are five custom
options, prefaced by
Output Rate — Press the
•
and refresh rates (see
custom options, prefaced by
Audio Mute — Press the navigation buttons to mute (
•
You can also select
audio.
Test Pattern — Press the navigation buttons to select an available test pattern to
•
display or to turn a test pattern off (see
on page 38). The available test pattern selections are
Crosshatch
is
Off
DHCP Mode — Press the
•
mode.
• IP Address — Press the ƒ and „ buttons to switch between octets. Press the
< buttons to change the value of a selected octet.
Quick Setup Submenu
submenu is displayed by default when the OSD is first opened, and
<
and buttons to navigate through the selected list. Selecting
through
C1 C5
>
and
Output Rate
through
C1
to mute analog audio or
Analog
, ,
Color Bars Grayscale
.
>
and
IN1804 Scaling Presentation Switcher • Operation
.
<
buttons to select from a list of output resolutions
on submenu on page 33). There are five
Output
. The default setting is
C5
) or unmute (
On
Digital
Test Pattern on the OSD
,
Crop Alternating Pixels
, and (pink noise). The default setting
Audio Test
< buttons to enable ( ) or disable (
On
(the default)
Auto
.
1080p @ 60 Hz
) the audio.
Off
to mute embedded digital
submenu
Advanced
,
) DHCP
Off
>
and
27