User Log - Siemens SIPROTEC 5 Operation Manual

8.4.5.6

User Log

With the user-defined log (up to 2), you have the possibility of individual indication logging parallel to the
operational log. This is helpful, for example, in special monitoring tasks but also in the classification into
different areas of responsibility of the logs. Up to 200 indications can be stored in the user-defined log.
Reading from the PC with DIGSI 5
•
To reach the user-defined log of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Process Data → Log → User log 1/2
The status of the user-defined log last loaded from the device is shown to you.
•
To update (synchronization with the device) click the button Read log entries in the headline of the indi-
cation list (Figure 8-17
[scanwnmd-030211-01, 1, en_US]
Figure 8-17
Reading on the Device through the On-Site Operation Panel
•
To reach user-specific logs from the main menu, use the navigation keys of the on-site operation panel.
Main Menu → Indications → User-defined log 1/2
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site opera-
tion panel.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
a)).
Reading the User-Defined Log with DIGSI 5
Operation in the Operating State
8.4 Indications
127