Siemens SIPROTEC 5 Operation Manual page 111

Open the device.
²
You can now carry out configurations and settings in offline mode.
²
All the corresponding submenus are listed in the project tree under the device name.
[scproans-110413-01.tif, 1, en_US]
Figure 8-4
Once you have finished making changes in the device, you can load the complete parameter set from
²
your DIGSI 5 PC to the device.
To start a connection to the device, right-click the device and from the context menu that appears select
²
Connect to device
To load the parameter set to the device, tag the device with the mouse. Right-click with the mouse and in
²
the context menu that appears, select Load configuration in device
The parameter set is transferred and the device restarts automatically after successful transfer.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Offline Operation of the Device
(Figure 8-5 a).
Operation in the Operating State
8.3 Operation Options
(Figure 8-5 b).
111