Siemens SIPROTEC 5 Operation Manual page 61

[scabzstb-100211-01.tif, 1, en_US]
Figure 5-5
A ready-to-run device with large graphic display shows you the control display defined as the standard after
booting. By pressing and holding down the left navigation key, you get to the control display defined as
standard. By pressing the control key, you get to the control mode of the currently displayed control display.
If several displays are present, you can select them in order of parameterized sequence by pressing the right
and the left navigation keys.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Control Display
Using On-Site Operation Panel
5.3 Displays for Indication and Control
61