Menu Tree - Siemens SIPROTEC 5 Operation Manual

5.5

Menu Tree

The menu tree consists of the main menu and several levels of submenus. To navigate in the menu use the
keys on the operation panel of the base module.
Main Menu
Logs Menu
Measurements Menu
Control Menu
NOTE
i
i
The Switching mode and Switching authority submenus are not offered if the device has key switches to
the on-site control.
Settings Menu
The Settings menu is used for changing and adapting protection settings in the device. The menu follows a
usability (for example, request for acceptance after leaving certain menu levels).
NOTE
i
i
All visible settings are assigned to a certain adjustable settings group. You can view the number of settings
groups and set the activation of one of the settings groups in the General submenu.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
The main menu structure is firmly set and is not changeable. The submenus
depend on the hardware configuration and the configuration of functions.
In the Logs menu, the available logs recording events in the operating state
of the device are offered.
You will find information about reading and deleting logs in chapter
8.4.1 General .
In the Measurements menu, you can display various measured values.
Assignment to existing function groups (for example, line 1) is done in the
corresponding submenus.
The Control menu offers all mechanisms for on-site control. Access to indi-
vidual equipment (for example, circuit breakers) and the settings with
respect to interlocking mechanisms, switching authority and switching
mode is via submenus.
You will find information about controlling equipment and resetting saved
binary outputs and LEDs in chapter
Using On-Site Operation Panel
8.4.1 General .

5.5 Menu Tree

63