Siemens SIPROTEC 5 Operation Manual page 129

Reading from the PC with DIGSI 5
•
To reach the security log of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Device Information → Log → Security log
The status of the security log last loaded from the device is shown to you.
•
To update (synchronization with the device) click the button Update in the headline of the indication list.
[scsecmld-140912-01, 1, en_US]
Figure 8-20
Reading on the Device through the On-Site Operation Panel
•
To reach the security log from the main menu, use the navigation keys of the on-site operation panel.
Main Menu → Test & Diagnosis → Indications → Security log
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
[scseclog-090413-01.tif, 1, en_US]
Figure 8-21
NOTE
i
i
•
The logged indications are preconfigured and cannot be changed!
•
This log, which is organized as a ring buffer. cannot be deleted by the user!
•
If you want to archive security-relevant information without loss of information, you must regularly
read this log.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Reading the Communication Log with DIGSI 5
Reading the Security Log on the On-Site Operation Panel of the Device
Operation in the Operating State
8.4 Indications
129