Table of Contents
Advertisement
Displayed Information
DCF loaded
SG 1
SG 2
SG 3
SG 4
SG 5
SG 6
SG 7
SG 8
NOTE
i
i
•
The logged indications are preconfigured and cannot be changed!
•
The log, which is organized as a ring buffer, cannot be deleted by the user!
•
If you want to archive security-relevant information without loss of information, you must regularly
read this log.
•
You cannot route additional indication objects to the setting-history log.
3.1.5.6
User Log
With the user-defined log (up to 2), you have the possibility of individual indication logging parallel to the
operational log. This is helpful, for example, in special monitoring tasks but also in the classification into
different areas of responsibility of the logs. Up to 200 indications can be stored in the user-defined log.
Reading from the PC with DIGSI 5
•
To reach the user-defined log of your SIPROTEC 5 device, use the project-tree window.
Project → Device → Process Data → Log → User log 1/2
The status of the user-defined log last loaded from the device is shown to you.
•
To update (synchronization with the device) click the button Read log entries in the headline of the indi-
cation list
(Figure 3-11
[scanwnmd-030211-01, 2, en_US]
Figure 3-11
Reading on the Device through the On-Site Operation Panel
•
To reach user-specific logs from the main menu, use the navigation keys of the on-site operation panel.
Main Menu → Indications → User-defined log 1/2
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
•
Using the Info softkey, you can retrieve auxiliary information on the entry depending on the context.
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-9, Edition 11.2017
Explanation
DCF loaded into device
Settings group 1
Settings group 2
Settings group 3
Settings group 4
Settings group 5
Settings group 6
Settings group 7
Settings group 8
a)).
Reading the User-Defined Log with DIGSI 5
System Functions
3.1 Indications
61
Advertisement
Table of Contents
