Siemens SIPROTEC 5 Operation Manual page 191

Select the device driver (for example, in C:\temp).
²
In the open window, select the devices to be updated.
²
Click the Import button.
²
[scdddcom-220813-01, 1, en_US]
Figure 9-6
Once the procedure has run without errors, the following dialog appears:
[scsucddd-090413-01.tif, 1, en_US]
DIGSI 5 is restarted when you confirm by clicking the OK button.
Proceed as follows to complete the firmware update:
Click the device in the project tree.
²
Open the context menu.
²
Select Load firmware to device.
²
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016
Selecting the Device Drivers
Maintenance, On-the-Spot Assistance and Test
9.4 Firmware and Parameter Set Update
191