Siemens SIPROTEC 5 Operation Manual page 56

Using On-Site Operation Panel
5.2 Overview of Operator Elements and Display Elements
Operator Element/Display
Element
56
Function
Numerical keys and convertible function keys
This keypad is used for entering numerical values (with or without decimal
point). You can activate actions of function keys using these keys. The keys
<1> to <9> are double reserved for number entry and the functionality of
function keys. To activate the function keys, press the <Fn> key (<F1> to
<F9> in blue font).
Numerical keys
These keys are used for entering values and for navigation in menus.
According to the numbering on the right display edge, you can jump
directly into submenus or carry out settings.
Function keys <F1> to <F9>
You can execute configured actions with DIGSI 5 using the function keys.
For standard actions (for example, reading of the operational log on site)
this means a simplification. The following configurations for the function
keys are possible:
•
Jump into a specific menu
•
Jump into a specific log
•
Activation of a binary input indication (for example, start fault record,
testing binary inputs)
•
An adjustable function key mode is offered by the Toggle (edge-trig-
gered activation and termination) and Pulse (with activation time)
modes and the On and Off mode.
Note on the Toggle function key mode:
The default setting of the value of information in startup is Off, each
key press switches between the states ON and OFF.
In the routing to switching objects (information type SPC or DPC), the
current switch position is not considered. This means that a toggle
command is not executed if the switching object is already in this
switch position.
•
<F9> cannot be configured and is always assigned to switching
between languages
Activating function keys:
There are several methods available to you to activate function keys
•
<Fn> key + NUM LOCKkey (simultaneously)
Example: <F1> = <Fn> key + <1> key
•
<Fn> key alone → jump to the function key menu, selection of
function key via navigation keys and confirmation with OK or directly
by numeric input
Function keys menu
The configured assignment of function keys is visible in the function key
menu. The assignment of function keys <F1> to <F8> is defined in DIGSI 5.
They have different defaults depending on application template. A default
assignment exists for:
•
<F9>
Language change: Jump to the selection menu for languages
<F9> cannot be configured via DIGSI 5
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-7, Edition 06.2016