End Point Adjustment - FUTABA T4PM Instruction Manual

Display to "
(HOME screen)
Setting item selection
(Steering and Throttle direction)
- The direction (STR LFT and STR RGT) linked with the steering wheel is switched.
- The direction (THR FWD and THR BRK) linked with the throttle trigger is switched.
Setting item (channel and direction)
STR LFT:
STR RGT:
THR FWD:
THR BRK:
CH3/CH4 UP:
CH3/CH4 DWN: 3rd or 4th channel (down side)
Steering (END POINT) adjustment
(Preparation)
- Before setup of the steering end point adjustment (END
POINT), set the steering D/R trim (initial setup: DT4) to the
maximum steering angle position 100%.
- Use the (JOG) button to select the setting item "RGT" and
make the following adjustments: and make the following ad-
justments: Or turn the steering wheel to select LFT or RGT.
1
Steering (left side) adjustment
Turn the steering wheel fully to the left and use
the (+) or (-) buttons to adjust the steering an-
gle.
2
Steering (right side) adjustment
Turn the steering wheel fully to the right and use
the (+) or (-) buttons to adjust the steering angle.
3
When finished with the setting, return to the MENU screen
by pressing the (END) button.
48
"
(MENU 1 )
MENU-2
MENU-3
MENU-4
Steering (left side)
Steering (right side)
Throttle (foward side)
Throttle (brake side)
3rd or 4th channel (up side)
End Point Adjuster "END POINT"
(END POINT screen)
Select
"END POINT"
(HOME screen)
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Steering END POINT
STR LFT: 0~120
STR RGT: 0~120
Initial value: 100
100