When Using Four Dry Cell Batteries
Cut rib
- Cut out the six ribs inside the battery case referring to the figure.
Caution
When putting the dry battery box in the transmitter, please put it in the case from the side with wir-
ing. Also, when removing, please remove from wiring side.
When installing and removing from the side opposite to the instruction, there is a possibility that the wiring is caught in the
case and it is disconnected or short-circuited.
Warning
Be alert when using a cutter knaife or nipper.
Failure to use it or neglect attention may cause injury and is extremely dangerous.
Low battery alarm
type to " CSTM "
- Insert the dry battery box 4P-SQ
from the wiring side as shown.
133