Log Setting Start/Stop; Log - FUTABA T4PM Instruction Manual

Log Setting Start/Stop

The data from a telemetry sensor can be saved to the T4PM as a data log. Since the da-
one set of data is saved.
"
by throttle trigger from the log setting screen.
Data logging can also be started by throttle trigger from this screen and stopped by
Display "
(HOME screen)
Log setting method
(Preparation)
When using a switch to start and stop data logging, set SW2 to
"LOGGER" by the function select switch (page 92).
1
(Log function ON/OFF)
Move the cursor to the "MODE" setting item by
moving the (JOG) button, and turn on the log
function by setting "MODE" to "ACT" by press-
ing the (+) button or (-) button.
If "MODE" is not set to "ACT", the log function
will not be performed even if the switch, etc. is
operated.
"INH"
" "
122
"
"
(MENU 4 )
MENU-1
MENU-2
MENU-3
Telemetry "TELEMETRY"
(LOG MODE screen)
Select
"LOG DATA"
Function ON/OFF (MODE)
INH, ACT
Select button
- Select with the (+) or (-) buttons.